Komet Precision Wave KPW Up

Komet Precision Wave KPW Up with white deflector for head-up installation

The Komet Precision Wave (KPW) Up is built for the last part of the machine, where stable coverage still matters. Its oscillating white deflector helps deliver controlled, uniform droplet distribution within an optimal throw radius.

Find a Dealer

Mehr erfahren

Key features

Built for stable performance at the end of the system

  • Uniform End-of-System Coverage

    The oscillating deflector delivers a consistent, rainlike droplet pattern across the full throw radius.

  • Reliable at Low Pressure

    The vacuum-driven oscillation works smoothly even at minimal pressure, reducing drift and evaporation losses.

  • Superior Flushing Action

    Head-down orientation with larger nozzles clears debris and prevents accumulations at the end of the system.

  • Handles Difficult Water

    Built for systems running dirtier water, keeping the end of the pivot clear and operational.

ABOUT THE KPWThe KPW Up sits at the end of a pivot or linear machine, where uniform application is hardest to achieve. Built for head-up installation, it's the choice when you want dependable throw and consistent coverage at the outer edge.

At a glance

Key proof points for the KPW Up

The first questions are usually simple: where it fits, what range it covers, and whether the data is grounded. This section gives the essentials without overloading the page.

  • Validated data

    Tested

  • Launch year

    2025

  • Pressure range

    1–4 bar
Komet Precision Wave KPW Up head-up white deflector product image
Technical highlights

The parameters dealers and designers check first

KPW Up is designed for end-of-system use where fit, pressure range, and water distribution all need to work together. These are the main reference points taken from the product material.

Pressure Range1–4 bar
Nozzle Range10–18 mm | 52 - 90 1/128"
Flow Range4,0 - 24,0 m³/hr | 17,8 - 107,6 gpm
InstallationHead-up
Connection2” BSP/NPT
DeflectorWhite
Related products

Build the end-of-system package around the right components

KPW Up usually sits within a wider sprinkler package. These related products help cover the adjacent decisions around end-of-system application, pressure control, and in-span water distribution.

    • Produkt
    • Pivot End of System
    KPW Wave Head-Down

    KPW Wave Head Down

    End-of-System Regner | Gleichmäßige Verteilung & optimale Wurfweite

    • Produkt
    • Pivot End of System
    • Big Volume Guns
    Twin Max

    Twin Max

    Kompakter Großflächenregner | 12°/18°/24° & 12 Düsen

    • Produkt
    • Big Volume Guns
    • Pivot End of System
    Twin Ultra 101

    Twin Ultra 101

    Vielseitiger Großflächenregner | Erhältlich in 18°/21°/24°/Vari-Angle

Practical questions

What to check before specifying the KPW Up

Most questions at this stage are about fit, operating range, and how the device behaves in real conditions. The answers below stay close to the published product information and day-to-day application logic.

End-of-system position

KPW Up is intended for the end of a mechanized irrigation system such as a center pivot or linear machine. That last position matters because water application can become less stable beyond the final tower. The device is built to support more controlled and even water application in that zone.

Local support

Get the right KPW Up setup with local specification help

The right end-of-system device depends on more than one part number. Your local Komet partner can help check compatibility, nozzle choice, and the wider sprinkler package before ordering.

Find a dealer

  • Setup check

    Confirm fit, installation type, and package alignment before purchase.

  • Nozzle guidance

    Match nozzle selection to pressure range and application target.

  • Document support

    Get the right brochure, data sheet, and specification help quickly.

Downloads

KPW Up | Komet Precision Wave End-of-System Device