Previous Next

Advantages

  • 1Water distribution

    Efficient irrigation is one of the most important factors in crop production.
    A uniform water application within the wetted pattern, combined with proper overlap of the individual sprinkler patterns, distributes the water evenly across the crop area, giving the water the best opportunity to infiltrate into
    the root zone. In addition, a uniform water distribution over the entire wetted diameter of the sprinkler keeps the instantaneous application rate low, which reduces the chance of ponding and runoff.

    Read moreClose
  • 2Consistency of droplet size

    For the best irrigation performance two factors are crucial, reducing the kinetic energy of the water impact onto the soil and controlling wind drift. Delivering a consistent droplet size greatly reduces the loss from wind drift of the fine droplets/mist. In addition, a controlled consistent droplet size and uniform distribution of the droplets within the sprinkler pattern reduces the impact force typical of larger droplets on the soil. These kinds of droplets can cause soil sealing which in turn reduce the soil’s water intake rate, increasing the possibility of runoff and thus keeping the water from reaching the target root zone.

    Read moreClose
  • 3Energy Efficiency

    Pressure is a major factor in determining the operating cost of an irrigation system. The higher the pressure required to operate it, the higher the operating cost will be. Finding a method to limit the operating pressure requirement without sacrificing the quality of the water distribution uniformity is ideal. Upgrading the efficiency of the irrigation system can help to increase yields while reducing the operating costs.

    Read moreClose
  • 4Reliability

    Intensive farming practices require that every irrigation system operates reliably in order to maximize crop potential. Timing of water application is critical to the potential yield of the crop, especially during dry conditions. Therefore it is essential for growers to use only highly reliable products.

    Read moreClose
  • 5Adaptability

    It is fundamental that a pivot sprinkler adapts to different application conditions while maintaining excellent performance. The sprinkler must be able to cope with a wide range of environmental factors such as soil type, terrain, atmospheric conditions, water quality as well as different crops. For optimal irrigation the grower must have the ability to adapt to its prevailing factors.

    Read moreClose

Precision Twister (KPT)

  • Nozzle range

    43 nozzles

    2.0 – 10.3 mm

    10 – 52 1/128″

  • Flow range

    100.7 – 4844.4 l/hr

    0.44 – 21.33 gpm

  • Throw range

    9.0 – 16.8 m

    30.0 – 55.0 ft

    at 1.8 m (6 ft)
    ground clearance

Precision Twister (KPT)

Available models

Precision Twister (KPT)

  • Standard angle
    Precision Twister (KPT) - Standard angle
    For use on drops
    Description of allowed drop types
    • Flex hose drop
    • Semi-rigid poly drop: drop must have a min. of one steel adapter which must be installed on the gooseneck side. Poly pipe must be of low-medium density
    • Not for use on rigid PVC or steel drops
    • Other installation options will void the warranty
  • Low angle
    Precision Twister (KPT) - Low angle
    For use on drops
    Description of allowed drop types
    • Flex hose drop
    • Semi-rigid poly drop: drop must have a min. of one steel adapter which must be installed on the gooseneck side. Poly pipe must be of low-medium density
    • Not for use on rigid PVC or steel drops
    • Other installation options will void the warranty
  • Ultra-low angle
    Precision Twister (KPT) - Ultra-low angle
    For use on drops
    Description of allowed drop types
    • Flex hose drop
    • Semi-rigid poly drop: drop must have a min. of one steel adapter which must be installed on the gooseneck side. Poly pipe must be of low-medium density
    • Not for use on rigid PVC or steel drops
    • Other installation options will void the warranty
  • Low profile trajectory
    Precision Twister (KPT) - Low profile trajectory
    For use on top of pipe
    Allowed type of installation
    • For use on top of pipe only
    • Install the Komet KPT-Link connector between the regulator and the Komet Precision Twister (KPT-Peak)
    • The non use of the Komet KPT-Link connector will void the warranty
    • Use a steel nipple at the outlet
    • Other installation options will void the warranty

Precision Spray (KPS)

  • Nozzle range

    45 nozzles

    1.6 – 10.3 mm

    8 – 52 1/128″

  • Flow range

    64.7 – 5973.5 l/hr

    0.28 – 26.30 gpm

  • Throw range

    5.3 – 18.2 m

    17.5 – 59.7 ft

    at 1.8 m (6 ft)
    ground clearance

Precision Spray (KPS)

Available models

  • Precision Spray (KPS)360°

    Precision Spray (KPS) - 360°
  • Precision Spray (KPS)180° Part circle

    Precision Spray (KPS) - 180° Part circle
  • Precision Spray (KPS)Vertical Bubbler

    Precision Spray (KPS) - Vertical Bubbler

KPS Deflector (Reverse side option - Corn chemigation Deflector or installation of Mini Deflector)

  • Blue Deflector CC 33

    Precision Spray (KPS) - Blue Deflector CC 33
  • Black Deflector FL 33

    Precision Spray (KPS) - Black Deflector FL 33
  • Grey Deflector FL 24

    Precision Spray (KPS) - Grey Deflector FL 24
  • Yellow Deflector FL 30

    Precision Spray (KPS) - Yellow Deflector FL 30
  • Mini Black Deflector FL 24

    Precision Spray (KPS) - Mini Black Deflector FL 24
  • Mini Turquoise Deflector FL

    Precision Spray (KPS) - Mini Turquoise Deflector FL
  • Blue Deflector CC 15 - PC 180°

    Precision Spray (KPS) - Blue Deflector CC 15 - PC 180°

KPS Bubbler Deflectors

  • Bubbler deflector
    Reverse side CC 33 blue

    Precision Spray (KPS) - Bubbler deflector
Reverse side CC 33 blue
  • Bubbler deflector
    Reverse side FL 33 Black

    Precision Spray (KPS) - Bubbler deflector
Reverse side FL 33 Black
  • Bubbler deflector
    Reverse side FL 24 Grey

    Precision Spray (KPS) - Bubbler deflector
Reverse side FL 24 Grey
  • Bubbler deflector
    Reverse side FL 30 Yellow

    Precision Spray (KPS) - Bubbler deflector
Reverse side FL 30 Yellow
  • Bubbler Cap

    Precision Spray (KPS) - Bubbler Cap

Precision Regulator (KPR)

  • All-Flow
    Pressure Regulator

    Flow covers nozzle range

    1.6 – 10.3 mm

    8 – 52/128″

    with pressure range
    0.4 – 1.4 bar
    6 – 20 psi

Precision Regulator (KPR)

Available models

  • Precision Regulator (KPR)All-Flow 6 PSI

    Precision Regulator (KPR) - All-Flow 6 PSI
  • Precision Regulator (KPR)All-Flow 10 PSI

    Precision Regulator (KPR) - All-Flow 10 PSI
  • Precision Regulator (KPR)All-Flow 15 PSI

    Precision Regulator (KPR) - All-Flow 15 PSI
  • Precision Regulator (KPR)All-Flow 20 PSI

    Precision Regulator (KPR) - All-Flow 20 PSI

Precision Regulator (KPR) - Resources