This variant is specified for rigid drops. That matters because the part-circle pattern must stay correctly oriented in the intended direction. If your machine uses another drop configuration, the dealer should review the position and recommend the correct setup.

Standard, low, ultra-low, and Peak variants are selected for broader sprinkler package positions depending on height, wind, heat, and placement. The PC-180° is different because it delivers a 180° wetted pattern for a specific tower-area task. It should be treated as a specialist variant, not as a universal replacement across the system.

According to the published performance data, the KPT PC-180° covers nozzle sizes 14 to 52 /128 inch. Its published pressure range is 6 to 15 psi at the nozzle. Final selection should always be checked against the machine design and local field conditions.

That is the main application intent. By directing water in a part-circle pattern away from the tower track area, the sprinkler supports drier tracks than a full-circle pattern in the same position. Actual field result still depends on package design, spacing, pressure, and machine setup.

The fastest route is usually your local Komet dealer or support contact. They can check the tower position, drop type, nozzle choice, pressure, and how the PC-180° fits with the rest of the sprinkler package. That helps avoid mismatch and saves time later in the season.